top of page

TRANSFORMERS

Robust Universal Voltage input and multi option dimming DC output transformers (aka... Power Supplies or Drivers)

Convey Line of Power Supplies for most applications.

3rd Party Options available based on Project Requirements - such as Lutron, ELDOLED, Meanwell, ERP and coordination with existing systems.​

All Products are cULus listed for USA/Canada Applications.

​Consult factory for CE rated drivers for your international projects. Some countries require additional certifications.

T/PSU-UNV

driver new.jpg

STATIC WHITE AND WARM DIM APPLICATIONS

Universal 120-277v Input - 24v DC Output with Junction Box Voltage Barrier

Various Outputs from 1x30w, 1x60w, 1x96w, 1x150w, 1x300w, 2x96w, 3x96w, 4x96w

Universal Dimming in one Transformer... Triac (2 Wire), ELV (2 Wire), 0-10v and On-Board Potentiometer Option.

PRODUCT DATA SHEET                           

T/PSU-TW2

tw2 driver.jpg

TUNABLE WHITE APPLICATIONS - DUAL 0-10V INPUTS

Universal 120-277v Input - 24v DC Output with Junction Box Voltage Barrier

1x96w Output

Dual 0-10v Signal Inputs. One signal for Intensity/Brightness and One Signal to control CCT/Color

PRODUCT DATA SHEET                        

T/PSU-DALI

tw2 driver.jpg

DALI CONTROL APPLICATIONS - STATIC AND TUNABLE WHITE

Universal 120-277v Input - 24v DC Output with Junction Box Voltage Barrier

1x96w Output

DALI Input or additional "LUT" Wireless Lutron Node (refer to www.lutron.com for specifications).

PRODUCT DATA SHEET                      

T/PSU-DMX

driver.jpg

DMX ADDRESSABLE FOR STATIC WHITE, TUNABLE WHITE, RGB, RGBW AND RGB+TW APPLICATIONS

Universal 120-277v Input - 24v DC Output with Junction Box Voltage Barrier

Various Outputs from 100w, 200w and 300w. Transformer wattage rating is split between the number

of low voltage outputs(ex: 300w 5 Channel is 5x60w Output)

Outputs: 1Channel (Static White and Warm Dim), 2Channel (Tunable White), 3 Channel (RGB),

                4 Channel (RGBW) and 5 Channel (RGB+TW)

Built in RDM DMX Decoder! No need for separate Transformer and DMX Decoder.

All T/PSU-DMX Transformers can be factory set to your DMX address at no additional charge!

Simplifying your "controls programming" on site.

PRODUCT DATA SHEET                   

T/PSU-ND

JVLM-Series-60-100W_edited.jpg

TRANSFORMER FOR NON-DIM OR CASAMBI APPLICATIONS

Universal 120-277v Input - 24v DC Output with Junction Box Voltage Barrier

1x100w Output

Smaller profile and budget friendly for non dimming applications or when using

Casambi Option (PWM4 Module for PWM Dimming/Color)

 

PRODUCT DATA SHEET                    

FACTORY OPTIONS

POT_edited_edited.jpg

POT

Factory installed on board

Potentiometer Dimmable down to 1%

(TW2 Driver Requires 2xPOT)

vive.jpg

PP

Factory installed Power Pack.

Lutron "Vive" shown for reference.

Consult factory for options.

node_edited_edited.jpg

LUT

Factory installed Lutron Athena Node.

Use with T-PSU-24-DALI Transformers.

casambi_CBU-PWM4_pb_edited_edited.jpg

CASAMBI

Factory installed Casambi PWM4

Module for Static White, Warm Dim,

Tunable White, RGB and RGBW

applications.

T/PSU-ND100W Transformer ONLY

cord-plug.webp

CP9

Factory installed SJ 9' Cord with a

3 Wire Grounded Plug.

Cord is typically a black color unless specified as another finish in the specification.

flex whip.webp

FLEX

Factory installed 9' MC 3 Wire Cable

with 0-10v dimming for

Commercial applications.

bottom of page